Dive Centre
You have no items in your cart.


Aqualung Axiom I3 BCD

CODE: 312370

The Axiom i3 is our most comfortable and easy-to-use BC yet. It is a feature-rich, ADV style, wrap-around jacket that incorporates the innovative i3 inflation/deflation system (patented). The integrated Wrapture™ harness system (pat. pend.) allows you to stand up straight in total comfort while the cylinder remains perfectly vertical and pulled in close. Diving has never been this comfortable.

The GripLock™ tank band and buckle system makes its debut on the Axiom i3. This strong, secure system makes attachment to a cylinder easier than ever before. Gone are the days of complicated web weaving and you don't have to worry about pinching your fingers with the innovative finger saver feature (pat. pend.)

Click here for a video on the new Aqualung I3 Inflator System.

Click here for a video on the new Aqualung Grip lock Tank Band!

Click here for a video on the new Wrapture Harness System.

The Wrapture™ harness system, using the shoulder swivel buckles (patented) and a customized back plate, provides comfort and stability while preventing "ride-up" at the surface

The i3 Control System (patented) provides single touch control for inflation and deflation.

The low profile flat e-valves (pat. pend.) all open simultaneously when the i3 lever is depressed.

The GripLock™ tank band and buckle system provides security and easy change out of cylinders.

SureLock II weight pouches (patented) provide a simple, single-pull release. Loading is as simple as insert and "click".

Pull down oral inflator is easy to deploy, use and stow.

A bladder retraction system is used to pull in the sides of the bladder during deflation

An adjustable chest strap can be raised or lowered on a rail system.

A scooped octo-pocket on the top, front of the right lobe makes it easy to stow and deploy an octopus. The octopus remains visible and accessible throughout the dive.

Some divers may find it useful to run their instruments behind the left pocket and out the scooped opening on the top, front of the lobe.

Pocket within a pocket - A small security pocket is found on the flap of a larger drop-down pocket

Knife attachment points are found on the left lobe

Features 5 stainless steel D-rings and 2 plastic D-rings for all of your accessories.

Right shoulder pull dump

Rolled neck collar for comfort

WEIGHT: Small 3.0kg, Medium 3.2kg - Medium Large 3.4kg - Large 3.6kg, X Large 3.8kg

Available to Order - Estimated 5-7 day delivery to your door.



X Small

152 - 165

45 - 56

56 - 91

81 - 97



157 - 170

54 - 70

68 - 104

86 - 102



170 - 178 

68 - 74

76 - 112

99 - 114


Medium Large

178 - 183

72 - 86 

81 - 117

104 - 119



183 - 188

81 - 95

89 - 124

109 - 124


X Large

188 - 196

 88 - 108

94 - 129

114 - 130


XX Large

190 - 198

91 - 112

102 - 128

114 - 130


How to Size your BCD.

Men are measured at waistline (widest part of waist), rather than normal beltline.

Waist size in men is normally measured by placing the measuring tape around the waist, cresting the pelvic bone. This measurement is not accurate for BC fitting.

The waist size in men should be measured at the height of the belly button just above the pelvic bone. Women's waist size is always measured just above the pelvic bone.

This same measurement applies for BC fitting.

Over The Shoulder (OTS) measurement is taken by placing the measuring tape across either the right or left shoulder and reading the distance between the top of the waist line on the back to the top of the waist line in the front.

Again, for this measurement in men the waistline is taken to be at the height of the belly button. When fitting the customer in their respective waist size and OTS range, inquire what thickness of wetsuit the BC is most likely to be worn with. Calculate about a 5cm allowance for the waist measurements for thick, cold water suits.

All details, prices and availability are subject to change - All rights reserved Dive Centre Ltd 1972-2022