You have no items in your cart.
Stay informed of the latest news and specials.
1 Ascension Place, Rosedale, Auckland 0632
Deliveries to: 5/20 Constellation Drive,
Rosedale,
North Shore,
Auckland 0632
Ph: +64 9 444 7698
Maximum of 6 rock lobster (both species combined) on any one day.
Except Te Arai Point, Auckland to Cape Runaway where a total of 3 spiny rock lobsters can be taken, and the remainder (up to 6 in total) can be packhorse rock lobster. If no spiny rock lobsters are taken at the same time, 6 packhorse lobsters can be taken.
Rules changing in CRA2 area from 1 July 2020
Measure the tail width in a straight line between the tips of the two large (primary) spines on the second segment of the tail. If you are unsure of the sex, use the 60mm measurement.
Measure the tail length along the underside in a straight line from the rear of the calcified bar on the first segment to the tip of the middle fan of the tail. Must have a tail length of at least 216mm (male and female).
There are rules and protections for gathering rock lobster/crayfish that cover: protected types, gathering methods, pot construction and use.
From Te Arai Point, Auckland to Cape Runaway telson clipping is required for all recreationally harvested spiny rock lobsters. The last third of the telson (central part of the tail fan) must be cut off so that it is noticeably shorter than the other sections of the tail fan. This must be done to all legal spiny rock lobsters as soon as they are taken.
Labelled diagram of a telson-clipped lobster [PDF, 551 KB]
Do not telson clip any packhorse rock lobsters.
MANUFACTURER: Aqualung
CODE: 1003459
PRICE:$216.00
The Argonaut Dive knife is designed to be one of our best and toughest knives. The butt, handle, hilt and blade are all fashioned out of one piece of 4mm thick titanium. Then coated in black EDP, sharpened and laser etched. The handle is then wrapped, twice, in 5mm paracord and tied off with a 12cm leash. 2mm thick Kydex plastic is then heated and thermoformed around the knife to make the sheath. 3.2mm grommets are inserted and the excess material is removed with a heat knife. The final stage is laser etching a subtle Aqua Lung logo on one side of the sheath.
The blade is cut into two styles; but only this Blunt Tip version is available in Australasia due to importation restrictions. One full side of the Blunt blade is die cut with rounded serrations.
The handles are wrapped 12.5mm from the hilt to provide a spot for the forefinger and extra grip for the sheath. The butt of the handle features a sharp tactical tool and the skeleton holes in the handle are hex wrenches for emergency situations.
All details, prices and availability are subject to change - All rights reserved Dive Centre Ltd 1972-2025