105CF DUMPY NO LONGER IMPORTED INTO NZ :(

Dimensions (with boot & valve) - 515mm tall - 204mm diameter

Weight Empty (with boot & valve) - 16kg

Weight Full - 19kg

First Test due: ??

Approved for Enriched Air up to 40%

All of our Dive cylinders come with a DIN Convertible valve (included in the price) that can be filled to max. 225 Bar as an "open face" valve but 232 Bar for Faber Steel cylinders (240 Bar for 95cf Catalina) when converted to DIN and used with a DIN Regulator. 

All valves are stamped with your initials and cylinders come filled with neat sweet dry filtered Dive Centre Air! (Unless couriered to you directly, as they have to be empty but are assembled and ready to fill).

Advice

Steel vs Aluminium is a question we're asked all the time, and it's a good one! There is no short answer and it is really dependant on several factors.

1. Price - Usually there is quite a difference between Steel and Alluminium cylinders; this has been fixed by our current pricing as there is now very little difference, although at some other shops it is still significant. 

2. The amount of air you actually need - The most popular steel cylinders are the big ones! The 15 litre holds around 30% more air, and is slightly shorter than the big aluminium. The 12 litre model holds 10% more air but it is also 10% lighter! The Dumpy 12 litre model is popular because it's much shorter so is easier to carry and store.

3. Air Consumption - If you are breathing through your cylinder faster than the buddies you are diving with, then the bigger steel cylinders are a great way to even up the game! If you go through your air at the same speed or slower than your buddies, it is a waste of time having more air, as you'll have to come up when your buddy does anyway! Stick with the same size cylinder that they use.

4. Warranty - You get a 10 year warranty from date of manufacture with Catalina Aluminium cylinders, and a 5 year warranty with Faber Steel.

5. Buoyancy - All cylinders get lighter as they empty, however there is a difference between steel and aluminium. Luxfer Aluminium cylinders will become positively buoyant when low on air, Faber steel and Catalina Alluminium cylinders are still slightly negatively buoyant when low on air. This means you don't have to wear extra lead to counteract that buoyancy at the end of the dive, and a lighter weightbelt is a good thing!

6. Corrosion - Faber steel cylinders are Zinc coated on the inside and under the paintwork on the outside, to try and stop rust, but scratches and Hydrostatic test marks will rust eventually. And if you get a fill with to much moisture or accidently "fully" empty your cylinder, it could start rusting inside! Not good!! (Ensure you only get fills from a reputable air source). Click here to see the "peace of mind" you get with Dive Centre Air! Aluminium cylinders don't rust, so from a maintainence issue, you don't have to repaint or rub down alluminium cylinders, and although it is recommended for aluminium, washing down steel cylinders after use is HIGHLY recommended! You can get a build up of aluminium oxide (white powder) inside aluminium cylinders from to much moisture in bad air, and over time this can cause pitting which will cause your cylinder to be condemned. A steel cylinder with rust inside will end the same way so clean air and never emptying your cylinder are both important!

As you can see, there is a bit to this decision. :-)

But once you own your own cylinders, going for a dive is so much more convenient, because there they are, sitting in your garage, full of air, ready to go!

Choose Dive Centre, NZ's most trusted dive professionals.

All prices include GST, Valve & first fill, but prices, availability and details are subject to change without notice. Please call us on 09 444 7698 oremail us now, to confirm availability and details.